Welcome to the Course
How the Course Works
Using the Code
Earning the Certificate
Chapter 1: Why Every Measurement Needs an Uncertainty
1.1 What a Measurement Result Is
1.2 Do the Two Laboratories Agree?
1.3 What Uncertainty Is For
1.4 The Plan of This Book
1.5 A First Example in Python
1.6 What Uncertainty Is Not
Key Takeaways
Further Reading
Exercises
Lesson 1 Quiz
10 attempts allowed
Chapter 2: Errors and What They Are Not
2.1 Error, True Value, and Why We Never Know Either
2.2 Random and Systematic Effects
Watching a bias survive averaging
Repeatability and reproducibility
2.3 Corrections and the Uncertainty That Remains
2.4 Resolution: The Smallest Thing an Instrument Can Show
2.5 Blunders
2.6 A Vocabulary for the Rest of the Book
2.7 Worked Example: A Digital Caliper
Key Takeaways
Further Reading
Exercises
Lesson 2 Quiz
10 attempts allowed
Chapter 3: The Statistics You Need
3.1 Distributions as Descriptions of Doubt
Summarizing a distribution
3.2 The Distributions That Appear in Practice
Choosing among them
3.3 The Mean of Repeated Readings
3.4 Small Samples and Student’s t
Checking it by simulation
3.5 Correlation
3.6 What You Need, Summarized
3.7 Worked Example: Pooling Six Days of Repeatability
Key Takeaways
Further Reading
Exercises
Lesson 3 Quiz
10 attempts allowed
Chapter 4: The GUM Framework — Type A and Type B Evaluation
4.1 The Measurement Model
4.2 Type A Evaluation: Uncertainty from Repeated Readings
Pooled standard deviation
4.3 Type B Evaluation: Uncertainty from Everything Else
When there is no certificate
4.4 Combining: The Combined Standard Uncertainty
4.5 The Uncertainty Budget
4.6 What the Budget Tells You
4.7 Type A and Type B Are Not “Random” and “Systematic”
4.8 Worked Example: Weighing with an Air Buoyancy Correction
Key Takeaways
Further Reading
Exercises
Lesson 4 Quiz
10 attempts allowed
Chapter 5: Combining Uncertainties — The Law of Propagation
5.1 Sensitivity Coefficients
5.2 The Law for Uncorrelated Inputs
The cylinder, by hand
Relative uncertainties for products and powers
5.3 Sensitivity Coefficients by Computer
5.4 Correlated Inputs
Two resistors, one meter
5.5 Where the Law Fails
How to tell whether the law is safe
5.6 A Recipe
5.7 Worked Example: A Thermistor Thermometer
Key Takeaways
Further Reading
Exercises
Lesson 5 Quiz
10 attempts allowed
Chapter 6: A Complete Evaluation — Preparing a Calibration Standard
6.1 Specifying the Measurand
6.2 The Measurement Model
6.3 Identifying the Sources of Uncertainty
6.4 Quantifying Each Source
6.5 Combining
6.6 Checking the Result by Monte Carlo
6.7 Reporting
6.8 What Stage 1 Has Built
Key Takeaways
Further Reading
Exercises
Lesson 6 Quiz
10 attempts allowed
Chapter 7: Automatic Propagation with the uncertainties Package
7.1 Numbers That Carry Their Uncertainty
What a ufloat is not
7.2 Correlation Tracking: The Package’s Real Strength
Model shared effects as shared variables
Inspecting correlations
7.3 The Budget from the Package: Error Components
7.4 Functions and Arrays
Mathematical functions
Arrays of uncertain numbers
Performance
7.5 Results That Are Already Correlated
7.6 Wrapping Functions the Package Cannot See Inside
7.7 Pitfalls
7.8 Worked Example: The Refractive Index of a Prism
Key Takeaways
Further Reading
Exercises
Lesson 7 Quiz
10 attempts allowed
Chapter 8: Monte Carlo Propagation of Distributions
8.1 The Idea
8.2 Assigning and Sampling Input Distributions
The t distribution for a few readings
Correlated inputs
8.3 How Many Trials?
The adaptive procedure
8.4 Coverage Intervals
8.5 Validating the Law of Propagation
8.6 What Monte Carlo Does Not Do
8.7 Worked Example: An Orifice Flow Meter at Two Flow Rates
Key Takeaways
Further Reading
Exercises
Lesson 8 Quiz
10 attempts allowed
Chapter 9: Expanded Uncertainty, Coverage, and Degrees of Freedom
9.1 From Standard to Expanded Uncertainty
9.2 When a Rectangular Contribution Dominates
9.3 Degrees of Freedom
9.4 The Welch–Satterthwaite Formula
Does it work?
9.5 Choosing a Coverage Factor in Practice
9.6 Worked Example: Calibrating a Digital Thermometer
Key Takeaways
Further Reading
Exercises
Lesson 9 Quiz
10 attempts allowed
Chapter 10: Fitting Curves to Data with Error Bars
10.1 Least Squares with Error Bars
10.2 The Straight Line
A spring constant
10.3 Does the Model Fit? The Chi-Square Test
Look at the residuals
10.4 curve_fit and the Meaning of absolute_sigma
10.5 Using Fitted Parameters: Correlation Matters
Centring removes the correlation
10.6 Nonlinear Models
10.7 Checking a Fit by Simulation
10.8 Worked Example: A Half-Life from Counting Data
Key Takeaways
Further Reading
Exercises
Lesson 10 Quiz
10 attempts allowed
Chapter 11: Errors in Both Variables, Outliers, and Choosing a Model
11.1 When the Abscissa Is Uncertain
The effective-variance method
York’s method
The resistor
11.2 Orthogonal Distance Regression for Any Model
11.3 Outliers
What to do about an outlier
What not to do
11.4 Choosing a Model
11.5 What Stage 2 Has Built
11.6 Worked Example: The Degree of a Thermocouple Calibration
Key Takeaways
Further Reading
Exercises
Lesson 11 Quiz
10 attempts allowed
Chapter 12: Calibration Curves and Inverse Prediction
12.1 The Calibration Problem
12.2 Inverse Prediction
The same result with the uncertainties package
12.3 Designing the Calibration
12.4 The Standards Are Uncertain Too
12.5 Degrees of Freedom and Coverage
12.6 Reporting a Result Near Zero
12.7 Worked Example: A Load Cell with a Quadratic Calibration
Key Takeaways
Further Reading
Exercises
Lesson 12 Quiz
10 attempts allowed
Chapter 13: Case Study — Measuring g with a Pendulum
13.1 The Model
13.2 The Data
13.3 The Uncertainty Budget
13.4 Is the First-Order Result Good Enough?
13.5 A Better Design: Vary the Length
13.6 Comparing and Combining
13.7 Improving the Experiment
Key Takeaways
Further Reading
Exercises
Lesson 13 Quiz
10 attempts allowed
Chapter 14: Case Study — An Uncertainty Budget for a Chemical Analysis
14.1 Specifying the Measurand and the Model
14.2 Finding the Sources: The Cause-and-Effect Diagram
14.3 Quantifying the Inputs
14.4 The Bottom-Up Budget
14.5 Top-Down: What the Control Chart Says
14.6 Reconciling Bottom-Up and Top-Down
14.7 From Standardization to Analysis
14.8 Worked Example: Acidity of a Vinegar Sample
Key Takeaways
Further Reading
Exercises
Lesson 14 Quiz
10 attempts allowed
Chapter 15: Quality Assurance — Measurement Systems and Conformity Decisions
15.1 Measurement-System Analysis: Gauge R&R
The ANOVA method
Interpreting the indices
From gauge R&R to measurement uncertainty
15.2 Is the Instrument Good Enough? The Test Uncertainty Ratio
15.3 The Probability of Conformance
15.4 Decision Rules and Guard Bands
15.5 Specific and Global Risk
15.6 Worked Example: A Contaminant Near Its Legal Limit
Key Takeaways
Further Reading
Exercises
Lesson 15 Quiz
10 attempts allowed
Chapter 16: Reporting Measurement Results
16.1 What a Complete Report Contains
16.2 Ways of Writing the Result
16.3 Rounding
16.4 The Uncertainty Budget Table
16.5 Graphs with Error Bars
16.6 A Report Generator
16.7 A Checklist for Reports
16.8 Closing Remarks
Key Takeaways
Further Reading
Exercises
Lesson 16 Quiz
10 attempts allowed
Appendix A: Python Setup and Quick Reference
A.1 Installing the Tools
A.2 The uncertainties Package at a Glance
A.3 NumPy and SciPy Functions Used Most Often
Appendix B: Distributions and Coverage Factors
B.1 Standard Uncertainty from Common Distributions
B.2 Coverage Factors from the t Distribution
B.3 Key Formulas
Appendix D: Answers and Hints for Selected Exercises
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
Chapter 9
Chapter 10
Chapter 11
Chapter 12
Chapter 13
Chapter 14
Chapter 15
Chapter 16
Appendix E: Glossary
Appendix F: Notation
Appendix G: A Cookbook of Short Recipes
G.1 Readings from a Display That Barely Changes
G.2 Combining Several Results: Weighted Mean and Birge Ratio
G.3 Comparing Two Results: En and Zeta Scores
G.4 Interpolating in a Calibration Table
G.5 Sums, Differences, and Ratios from One Instrument
G.6 How Many Readings Are Enough?
G.7 Monte Carlo with an Implicit Model
G.8 Uncertainty of a Median by Bootstrap
G.9 Integrating Sampled Data
G.10 Saving Results with Their Correlations
Appendix H: Type B Inputs for Common Laboratory Equipment
H.1 Where the Numbers Come From
H.2 Effects That Are Easy to Forget
H.3 A Short Checklist for Type B Inputs
Appendix I: Choosing a Method — A Decision Guide
I.1 From Problem to Method
I.2 Which Tool for Which Situation
Appendix J: A Worked Template — Calibrating a Gauge Block
J.1 The Measurement
J.2 First-Order Evaluation
J.3 The Trap: Zero Sensitivity Is Not Zero Effect
J.4 Result and Lessons
Measurement Uncertainty with Pytho
A Practical Guide to the GUM, Monte Carlo, and Curve Fitting
Learn to evaluate, propagate, and report measurement uncertainty the GUM way, from Type A and Type B evaluation to Monte Carlo and curve fitting, with Python code, a quiz in every lesson, and a certificate.
Minimum price
$39.00
$59.00
You pay
Author earns
About
About the Course
Instructor
About the Instructor
Kompri is an academic, author, investor, and educator based in Jambi, Indonesia. He holds a doctorate in Education Management and a bachelor’s degree in Physics, and has written and published dozens of books along with numerous other scholarly works. An avid reader, he is one of today’s most productive researchers. Alongside his academic career, he publishes both theoretical and practical books for readers around the world. His work rests on one conviction: knowledge is most valuable when it is clear, usable, and shared, so that anyone, in any country, can put it to work.
Material
Course Material
The Leanpub 60 Day 100% Happiness Guarantee
Within 60 days of purchase you can get a 100% refund on any Leanpub purchase, in two clicks.
See full terms...
Earn $8 on a $10 Purchase, and $16 on a $20 Purchase
We pay 80% royalties on purchases of $7.99 or more, and 80% royalties minus a 50 cent flat fee on purchases between $0.99 and $7.98. You earn $8 on a $10 sale, and $16 on a $20 sale. So, if we sell 5000 non-refunded copies of your book for $20, you'll earn $80,000.
(Yes, some authors have already earned much more than that on Leanpub.)
Learn more about writing on Leanpub
Free Updates. DRM Free.
If you buy a Leanpub book, you get free updates for as long as the author updates the book! Many authors use Leanpub to publish their books in-progress, while they are writing them. All readers get free updates, regardless of when they bought the book or how much they paid (including free).
Most Leanpub books are available in PDF (for computers) and EPUB (for phones, tablets and Kindle). The formats that a book includes are shown at the top right corner of this page.
Finally, Leanpub books don't have any DRM copy-protection nonsense, so you can easily read them on any supported device.
Learn more about Leanpub's ebook formats and where to read them
Write and Publish on Leanpub
You can use Leanpub to easily write, publish and sell in-progress and completed ebooks and online courses!
Leanpub is a powerful platform for serious authors, combining a simple, elegant writing and publishing workflow with a store focused on selling in-progress ebooks.
Leanpub is a magical typewriter for authors: just write in plain text, and to publish your ebook, just click a button. (Or, if you are producing your ebook your own way, you can even upload your own PDF and/or EPUB files and then publish with one click!) It really is that easy.